Phasing heavier materials out of my EDC at the moment. 

***NO TRADES***

Knurled Brass Lanyard Bead 

There are several splotches on the gold that are clearly visible. It has a wonderful, substantial weight if you like a heavier feel. There are some scratches on the silver portion of the blade, but they do not appear to be too deep. 
Liner lock and standard flipper made of 440 stainless steel. 
-Designed in the USA.
-Blade length: 3 1/4 inches.
-Handle length: 4 1/2 inches.
-needs a good polish. 

Falcon Folding Knife

Brandless Antique folding knife. 
Stainless steel with a 3in blade and a 4in handle.
Back lock and nail nick.
Gold has tarnished with time. The blade itself is in good shape. And the wood in the handle is quite good but worn from time. The only thing I'm concerned about is the gold plating in the photographs.  

This is a Tac Force Folding knife made of TF-438 stainless steel and designed in America. It was a fantastic EDC back then, but I've since moved on to better brands. Good little knife for getting a little messy for camping trips, ETC. The metal has corroded from black oxide to a faded natural gray tone, and one of the scales has a defect in the white marble plastic. It has a fun little stiletto feel. 

Folding Knife & Tac Force Folding Knife

This is a lower quality but functional EDC. The knife's blade length of approximately 4 inches makes it on the larger side of EDC's. The only concern is that the little screws have a slight tarnish, but nothing permanent. Perhaps a little rust remover or vinegar could help to polish the screws. The blade itself is in great shape, and the handle is made of plastic, so it is very lightweight.  

EliteEdge is well-known for its abstract patterns, artistic focus, and collectible knives. The usage rating is based on the knife's paintwork showing signs of wear and tear, including minor chips. The blade is composed of stainless steel. A unique everyday carry for sure. 
-liner lock
-3.5-3.99in blade
-flipper 


Frost Cutlery Folding Knife & EliteEdge Mermaid Knife

Both in good condition and perfect for little jobs like fishing line cutting or a last minute opener for packages. They come as a package deal. 
-Black knife
Blade length- 1 1/2 in
Handle length- 2 1/2 in
Stainless steel
Linear lock and thumb stud
Built in red light and key chain
Red Frost Cutlery knife
Blade length- 2 1/2 in
Handle length- 3in
Stainless steel
Back lock and blade whole
Serrated
-Black pocket knife
back lock
blade length 2-2.99in
blade whole
flaw- the clip on the handle is bent (see pictures)


3 small pocket knife

length 52.8mm * width 36.7mm * thickness 16.5mm

New Outdoor Luminous Knuckle Edc Survival Escape Tool Flsorescence Ring Breaker

Good everyday carry knife, great for hard use. Top has been re-profiled.

kershaw speedsafe assisted flipper knife

Great hard use pocket knife for every day carry.

Coastal conservation association folding knife

This Buck knife makes a great EDC. It's lightweight and has a serrated edge that stays sharp. The blade has been used a little, so there are some scratches, but they are not too serious. Being a Buck knife, it fits the reliability criterion. Serrations could possibly be sharpened, but they still have a sharp edge, none the less.  

Has had some use however still in good condition. Light weight handle and sharp blade retention makes for a good EDC. The tip of the blade did have some scratches but the rest of the blade is fine. The handle also has some scruffs but over all in good shape. Made of stainless steel.
-blade length 3-3.99in
-thumb stud
-liner lock



BUCK Folding Knife & Frost cutlery

Very old knife, handed down from my granddad. Not in the best shape but could be used still.

Uncle henry 885uh

Ridge Runner rr630 knife

Medium sized knife, great for everyday carry.

Mtech camo folding knife

Gerber Paraframe 1 Plain Edge

Small folding knife, great for everyday carry.

Elk Ridge ER-211i folding knife

Good pocket knife for quick deployment and everyday tasks.

Tac-force speedster black

Smith & Wesson special tactical knife camo

Vortek Hawkeye - LNIB w/original packaging. This has been carried and cut with very lightly - opening a few pieces of mail. It still has the factory edge. I was skeptical about these knives, but this has a nice thin profile, good lockup, and solid action.

Happy to combine shipping, deal on multiple knives, and will consider trade offers.

I don't care to dabble in returns, but I will work to make things right if you don't get what's advertised - within reason.

Vortek Hawkeye

Only used a couple times, still on factory edge. 

(No Clip)
(Not sure if the steel, probably 440C)
(Steel Framelock)

Browning 0020

Only cut paper, still on factory edge.

(No Clip)
(Assisted with flipper and thumbstuds)
(440C)
(To be honest, with the USA coating, I can’t tell if the handle material is some sort of metal or plastic)
(

Grand Way Knife

This simple knife is all decked out for a Fourth of July party and features custom resin scales of America’s colors and include a simple Kydex sheath.

Overall Length: 8in
Blade: 3in
Material:  Stainless Steel
Handle:  Red/White/Blue Resin

All American Drop Point Knife

Used a little bit, still on factory edge.

(440C)
(G10)

Ganzo G746

Barely used, still on factory edge.

(Aluminum)
(I think the steel is 440C)

Bear & Son Farmhand (Stainless)

This lot includes 9 various knife brand promotional items for your collection! I’ve collected these over the years and sure these would make a great addition to a wall, bag, etc…!

Knife Nut 9 Promotional Items Lot - NEW!

New DAN’S Whetstone Co. Sharpening Stone w/Leather Slip for your collection! Quick & secure shipping and properly packaged.

DAN’S Whetstone Co. Sharpening Stone w/Leather Slip - NEW!

Great pocket knife to used for most tasks.